Loading the content... Loading depends on your connection speed!
- Sign In /
SBB1 Button Box
SBB1 Button Box
The SBB1 was designed to be compact, to allow easy fitting in confined spaces. Featuring 8 buttons (six single buttons, plus the two rotaries are also push-buttons!) and two rotary encoders, the SBB1 is built with our usual high-quality components and constructed in our multilayer method to ensure a beautiful and long lasting finish.
The unit is Fully USB Plug n Play, just plug it in and go, no software needed, we configure the unit for you and supply everything needed, complete with mounting hardware.
Product Description
- 6 Momentary Push-Buttons
- 2 Rotary Encoders with built in Push-Buttons
- USB Lead Included
- Simple Plug n Play… No software or setup needed
- Carbon Look, Multilayer Construction for a long lasting and super high quality finish
- 4 Rear Mounting Holes (Stainless steel screws included)
- Small fitting footprint: The unit measurements are approximately: H: 80mm W: 104mm D: 60mm
Related Products
A simple but complete bolt fitting kit suitable for both Leo Bodnar’s SLI-Pro and SLI-M shift light arrays. Consisting of high-quality stainless steel cap head bolts,
stainless nuts, washers and poly spacers to protect your board when tightening the fasteners.
No more searching for the right fasteners or using inferior parts or wood screws! We even include a suitable Allen Key.
A must have kit for Heel ‘n’ Toe drivers using Logitech’s G25 pedals. This complete and simple kit allows users to raise the brake (or any other) pedal from 1mm to 20mm in 1mm increments.
The kit contains 6 x 3mm and 2 x 1mm beautifully laser cut spacers and a selection of twelve high-quality stainless steel countersunk cap head bolts in various lengths to suit (plus 4 more standard length stainless bolts to replace the originals on the gas/clutch pedals too), with the appropriate Allen key.
The ControlR Bottom Box adds a whole new level of function as well as aesthetics when combined with the ControlR Interface.
The unit is hand assembled using only the finest materials and parts, featuring 10 buttons, 4 rotary encoders, 6 toggles switches and 2 safety toggles as well as a functioning battery cut off switch (seen as a toggle switch by Windows)
The ControlR Interface is a fully modular and upgradeable controller, far more than a simple button box, the unit is able to expand with add-on gauge packs, extra button boxes and more.
The basic ControlR features 10 quality push buttons, 5 rotary encoders (including our unique Brake Bias Knob) and 5 toggle switches and is built to the highest standards with our multi-layer carbon look, beautiful laser engraved face plate and coloured roundels on the encoders.
The unit is Fully USB Plug n Play, just plug it in and go, no software needed, we configure the unit for you and supply everything needed, complete with mounting hardware.
Please note that due to high current demand ControlR orders are currently taking around 1-2 weeks to ship from order date – We will, of course, keep customers informed of delivery dates by e-mail
SR Hardware manufacture Simulator Dashboards for Race Teams, Driver Training Company’s and Race Rooms as well as private clients who wish to take their simulation rigs to the next level. Our ability to manufacture using a wide range of materials including Alloy, Stainless Steel, composites and acrylics means we can offer a comprehensive dash building service.
Add to this that we can design and manufacture specific PCB’s to suit individual and small production runs means SRH can deliver the item you need! Take advantage of our design teams experience, they can guide you through component selection, material choices, the C.A.D. design phase and finally production of your dream product.
Low cost Initial Quotation and Drawing phase (From £35) * Please note this charge is made for the time to make up a costing and initial drawings and is Non-Refundable due to the custom nature of the service.
Contact us for more information
A new concept in simulator controls, the wheel based dashboard is a superior and immersive, yet simple way to add extra controls and realism to your sim rig!
Our Fanatec CSW dashboard fixes with 4 supplied stainless steel bolts, simply bolt the dash on, plug in the USB lead, and you’re ready.
SRH can offer a complete custom Button Box / Control Panel service. We can manufacture one-off or small production runs of units to our customers specification. From helping with initial concept, through to C.A.D. Design, component selection and final production. Because we work in a wide range of materials including Alloy, Stainless Steel, composites and acrylics means we can offer a comprehensive service that is second to none. Add to this that we can supply all our products either partially or fully assembled, means we are flexible enough to deliver the right product to suit your specific needs.
Take advantage of our design teams experience, they can guide you through component selection, material choices, the C.A.D. design phase and finally production of your dream product.
Low-cost Initial Quotation and Drawing Phase (From £15)
* Please note this charge is made for the time to make up a costing and initial drawings and is Non-Refundable due to the custom nature of the service.
Contact us for more information
Featuring 14 buttons (12 single buttons plus the two rotaries are also push-buttons!) and two rotary encoders, the SBB2 is built with our usual high-quality components and constructed in our multi-layer method to ensure a beautiful and long lasting finish.
The unit is Fully USB Plug n Play, just plug it in and go, no software needed, we configure the unit for you and supply everything needed, complete with mounting hardware.
Built using high-tech components, modern materials and hand finished to create a display / Button Box that not only has superb functionality, but also modern styling! If you want to use an SLI-Pro shift light unit, but can’t or don’t want to wheel mount it, this is the answer.
The unit offers a simple but very stylish solution to the problem and incorporates eight high-quality buttons and four rotary encoders pre-installed in to the unit.
The button box is a ‘FULLY BUILT’ unit, supplied with an SLI-Pro fitted, wired and ready to go.
