SRH can offer a complete custom Button Box / Control Panel service. We can manufacture one-off or small production runs of units to our customers specification. From helping with initial concept, through to C.A.D. Design, component selection and final production. Because we work in a wide range of materials including Alloy, Stainless Steel, composites and acrylics means we can offer a comprehensive service that is second to none. Add to this that we can supply all our products either partially or fully assembled, means we are flexible enough to deliver the right product to suit your specific needs.

Take advantage of our design teams experience, they can guide you through component selection, material choices, the C.A.D. design phase and finally production of your dream product.

Low-cost Initial Quotation and Drawing Phase (From £15)

* Please note this charge is made for the time to make up a costing and initial drawings and is Non-Refundable due to the custom nature of the service.

Contact us for more information

Extended shifter paddles for the Thrustmaster GTE wheel, made from aluminum alloy, precision cut and then formed and black anodized for a super finish.

These are perfect to go with our GTE wheel adapters, two sizes are available, Medium, for wheels up to 320mm and Large for wheels from 300mm and above.

Please check the size you need as the desired position of paddles varies with wheels and personal preference.

SRH can offer a complete custom housing / fixture service for all of Symprojects devices. We can manufacture one-off or small production runs of Fixtures to our customers specification. From helping with initial concept, through to C.A.D. Design, component selection and final production.

Because we work in a wide range of materials including Alloy, Stainless Steel, composites and acrylics means we can offer a comprehensive service that is second to none. Add to this that we can supply all our products either partially or fully assembled, means we are flexible enough to deliver the right product to suit your specific needs.

Take advantage of our design teams experience, they can guide you through component selection, material choices, the C.A.D. design phase and finally production of your dream product.

Low-cost Initial Quotation and Drawing Phase (From £15)

 Please note this charge is made for the time to make up a costing and initial drawings and is Non-Refundable due to the custom nature of the service.

Contact us for more information

SR Hardware are now able to offer custom made, one-off paddle blocks and paddles for almost any application. We can also offer custom paddles to retro-fit to G25 / G27 etc for larger wheels and specialist shapes in both black and 2×2 twill carbon fiber.

The complete shifter block assemblies offer the highest quality in terms of both finish and feel/operation, add to this our custom made paddles (to your design shape and sized to fit any wheel size) and you have the equipment to build the base for your ultimate sim wheel! The paddles are adjustable for the throw and tension, allowing the user to attain the desired feel and ultimate control. Four paddle blocks (F1 style) will follow soon, with options for further custom applications also.

CURRENTLY NOT AVAILABLE 

SR Hardware’s Fanatec wheel adapters fit both GT2 and GT3 wheels as well as the CSR and CSR Elite, allowing the user to fit an aftermarket wheel rim to their Fanatec base. Beautifully made from a high-quality acrylic, they open up the possibility to mount a large range of wheels and even quick release hubs! These adapters are drilled to accept 70mm wheels/hubs (the size for the majority of modern aftermarket wheels such as Momo etc) and have a center hole for passing wiring etc.

PLEASE NOTE:

It is usually necessary to keep the original Fanatec wheels PCB plugged in to the base units wiring for the wheel to operate. There are a number of ‘workarounds’ for this problem, but the simplest is to lengthen the wiring harness to the original wheel and keep it connected but placed in a convenient place out of the way.

Another is to strip the PCB from the wheel and box and mount it. We are also looking in to the possibility of making a smaller PCB that could be fitted in to a wheel plate also. However, we cannot offer support for this issue and the purchaser should be aware of this BEFORE purchasing.

SR Hardware’s Thrustmaster GTE wheel adapter allows you to remove the original wheel rim and fit a REAL racing steering wheel to the GTE plate and paddles.

These adapters are drilled to accept 70mm PCD wheels/hubs (the sizes for the majority of modern aftermarket wheels such as Momo etc). They come complete with 3 countersunk  bolts to mount your new wheel and longer bolts to fit the adapter to the GTE Plate.

(Please note, this is the adapter ONLY and does NOT include the wheel, paddles or base of the GTE wheel)

These units are not meant for the repeated mounting and dismounting of wheels, we are working on an alloy version with thread inserts for customers who wish to swap wheels on these adapters.

SR Hardware’s Fanatec F1 wheel adapters allow the fitment of Quick Release hubs or other 70mm pcd adapters. This means you can now fit the F1 wheel to the SimXperience AccuForce, Leo Bodnar SimSteering or OSW direct Drive wheelbases. Made from 6mm thick black anodized alloy, the adapters are able to withstand the rigors of modern direct drive wheels.

PLEASE NOTE:

This is the adapter only and does not convert the electronics / buttons etc of the F1 wheel, nor do we supply instructions for this.

SR Hardware can manufacture one-off or small production runs of wheelplates to our customers specification. From helping with initial concept, through to C.A.D. Design, component selection and final production. Because we work in a wide range of materials including Alloy, Stainless Steel, composites and acrylics means we can offer a comprehensive service that is second to none. Add to this that we can supply all our products either partially or fully assembled, means we are flexible enough to deliver the right product to suit your specific needs.

Take advantage of our design teams experience, they can guide you through component selection, material choices, the C.A.D. design phase and finally production of your dream product.

Low-cost Initial Quotation and Drawing Phase (From £15)

 Please note this charge is made for the time to make up a costing and initial drawings and is Non-Refundable due to the custom nature of the service.

Contact us for more information

SRH can offer a complete custom wheel building service. We can manufacture one-off or small production runs of Wheels to our customers specification. From helping with initial concept, through to C.A.D. Design, component selection and final production. Because we work in a wide range of materials including Alloy, Stainless Steel, composites and acrylics means we can offer a comprehensive service that is second to none. Add to this that we can supply all our products either partially or fully assembled, means we are flexible enough to deliver the right product to suit your specific needs.

Take advantage of our design teams experience, they can guide you through component selection, material choices, the C.A.D. design phase and finally production of your dream product.

Low-cost Initial Quotation and Drawing Phase (From £25)

 Please note this charge is made for the time to make up a costing and initial drawings and is Non-Refundable due to the custom nature of the service.

Contact us for more information