Wheel Plates
Showing all 10 results
-
Wheel Plates
Thrustmaster GTE Pro-Race Wheel Plate
SR Hardware’s Thrustmaster GTE Wheel plate offers a very attractive and high-quality mounting solution for adding a Pro-Race SLI to a standard GTE wheel. These units come complete with a pre-fitted Pro-Race unit.
Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the SLI, leaving you to just fit the wheel plate to your GTE rim.
Please Note:
You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.
SKU: n/a -
Wheel Plates
Fanatec CSW Pro-Race SLI Mounting
Our Fanatec CSW Pro-Race SLI Mounting plates offer a very attractive and high-quality mounting solution for adding a Symprojects Pro-Race shift light array with two rotary encoders to a Fanatec CSW Base. These units come complete with rotary encoders pre-fitted and include the Pro-Race SLI pre-installed and wired.
Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and high-quality SLI Mounting. All the hard work is done is for you, we supply and fit the rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just bolt the plate to your CSW Base (Stainless Steel Bolts included)
SKU: n/a -
Custom Products, Wheel Plates
Custom Wheel Plates
SR Hardware can manufacture one-off or small production runs of wheelplates to our customers specification. From helping with initial concept, through to C.A.D. Design, component selection and final production. Because we work in a wide range of materials including Alloy, Stainless Steel, composites and acrylics means we can offer a comprehensive service that is second to none. Add to this that we can supply all our products either partially or fully assembled, means we are flexible enough to deliver the right product to suit your specific needs.
Take advantage of our design teams experience, they can guide you through component selection, material choices, the C.A.D. design phase and finally production of your dream product.
Low-cost Initial Quotation and Drawing Phase (From £15)
Please note this charge is made for the time to make up a costing and initial drawings and is Non-Refundable due to the custom nature of the service.
Contact us for more information
SKU: n/a -
Wheel Plates
Fanatec CSR / CSR-Elite SLI-Pro Wheel Plate
SR Hardware’s Fanatec SLI Mounting System is a unique concept that finally allows Fanatec CSR and CSR-Elite wheel owners to enjoy the benefits of an ‘on wheel’ shift light system yet still retain the original wheel and fit without drilling or modifying the standard wheel.
Built using our multi-layer construction technology from the finest materials and high-quality components, this mounting system breaks new ground in add on hardware for Fanatec wheels! Completely pre-built and assembled, the mount comes complete with two modified Rotary encoders an SLI-Pro installed and wired!
Fitting the unit to the Fanatec wheel is very straight forward. We utilise a high tech ‘Adhesive gel gasket’ on the bottom of the unit, whilst a see through acrylic plate mounts the top of the unit using the original screw hole for the wheel band behind the top of the wheel rim, making for a very secure fitment.
Please Note:
You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.
SKU: n/a -
Wheel Plates
Fanatec GT2 / GT3 SLI-Pro Wheel Plate
SR Hardware’s Fanatec SLI Mounting System is a unique concept that finally allows Fanatec wheel owners to enjoy the benefits of an ‘on wheel’ shift light system yet still retain the original wheel and fit without drilling or modifying the standard wheel.
Built using our multi-layer construction technology from the finest materials and high-quality components, this mounting system breaks new ground in add-on hardware for Fanatec wheels! Completely pre-built and assembled, the mount comes complete with two modified Rotary encoders and SLI-Pro installed and wired!
Fitting the unit to the Fanatec wheel is very straight forward. We utilise a high tech ‘Adhesive gel gasket’ on the bottom of the unit, whilst a see-through acrylic plate mounts the top of the unit using the original screw hole for the wheel band behind the top of the wheel rim, making for a very secure fitment.
Please Note:
You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.
SKU: n/a -
Wheel Plates
Logitech G27 Pro-Race Wheel Plate
SR Hardware’s Logitech G27 Pro-Race Wheel plates offer a very attractive and high quality complete mounting solution for adding a Symprojects Pro-Race shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. These units come complete with buttons and rotary encoders pre-fitted and include the Pro-Race SLI pre-fitted and wired.
Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just fit the wheel plate to your G27
Please Note:
You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.
SKU: n/a -
Wheel Plates
Logitech G25 Pro-Race Wheel Plate
SR Hardware’s Logitech G25 Pro-Race Wheel plates offer a very attractive and high quality complete mounting solution for adding a Symprojects Pro-Race shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. These units come complete with buttons and rotary encoders pre-fitted and include the Pro-Race SLI pre-fitted and wired.
Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just fit the wheel plate to your G25
Please Note:
You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.
SKU: n/a -
Wheel Plates
Logitech G27 SLI-Pro Wheel Plate
SR Hardware’s Logitech G27 SLI-Pro Wheel plates offer a very attractive and high quality complete mounting solution for adding a Leo Bodnar SLI-Pro shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. These units come complete with buttons and rotary encoders pre-fitted and include the SLI-Pro pre-fitted and wired.
Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just fit the wheel plate to your G27
Please Note:
You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.
SKU: n/a -
Wheel Plates
Logitech G25 SLI-Pro Wheel Plate
SR Hardware’s Logitech G25 SLI-Pro Wheel plates offer a very attractive and high quality complete mounting solution for adding a Leo Bodnar SLI-Pro shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. These units come complete with buttons and rotary encoders pre-fitted and include the SLI-Pro pre-fitted and wired.
Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just fit the wheel plate to your G25
Please Note:
You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.
SKU: n/a -
Wheel Plates
T500 Static Sliding Pro-Race System
SR Hardware’s Static Sliding SLI Mounting System has been designed to make mounting a Pro-Race Display to the T500 an easy and painless job without any of the USB cable issues normally found in wheel mounted systems. The mounting adjusts easily and quickly to fit either the GT and GTE wheel’s or the F1 wheel by use of its sliding top section. Simply slacken the two hex bolts slightly and raise or lower, then gently re-tighten… Simple
These units come complete with buttons pre-fitted and include the Pro-Race pre-fitted and wired. Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere.
SKU: n/a