Loading the content... Loading depends on your connection speed!
Showing all 6 results
Extended shifter paddles for the Thrustmaster GTE wheel, made from aluminum alloy, precision cut and then formed and black anodized for a super finish.
These are perfect to go with our GTE wheel adapters, two sizes are available, Medium, for wheels up to 320mm and Large for wheels from 300mm and above.
Please check the size you need as the desired position of paddles varies with wheels and personal preference.
SR Hardware’s Fanatec F1 wheel adapters allow the fitment of Quick Release hubs or other 70mm pcd adapters. This means you can now fit the F1 wheel to the SimXperience AccuForce, Leo Bodnar SimSteering or OSW direct Drive wheelbases. Made from 6mm thick black anodized alloy, the adapters are able to withstand the rigors of modern direct drive wheels.
This is the adapter only and does not convert the electronics / buttons etc of the F1 wheel, nor do we supply instructions for this.
SR Hardware’s Thrustmaster GTE wheel adapter allows you to remove the original wheel rim and fit a REAL racing steering wheel to the GTE plate and paddles.
These adapters are drilled to accept 70mm PCD wheels/hubs (the sizes for the majority of modern aftermarket wheels such as Momo etc). They come complete with 3 countersunk bolts to mount your new wheel and longer bolts to fit the adapter to the GTE Plate.
(Please note, this is the adapter ONLY and does NOT include the wheel, paddles or base of the GTE wheel)
These units are not meant for the repeated mounting and dismounting of wheels, we are working on an alloy version with thread inserts for customers who wish to swap wheels on these adapters.
SR Hardware’s Fanatec wheel adapters fit both GT2 and GT3 wheels as well as the CSR and CSR Elite, allowing the user to fit an aftermarket wheel rim to their Fanatec base. Beautifully made from a high-quality acrylic, they open up the possibility to mount a large range of wheels and even quick release hubs! These adapters are drilled to accept 70mm wheels/hubs (the size for the majority of modern aftermarket wheels such as Momo etc) and have a center hole for passing wiring etc.
It is usually necessary to keep the original Fanatec wheels PCB plugged in to the base units wiring for the wheel to operate. There are a number of ‘workarounds’ for this problem, but the simplest is to lengthen the wiring harness to the original wheel and keep it connected but placed in a convenient place out of the way.
Another is to strip the PCB from the wheel and box and mount it. We are also looking in to the possibility of making a smaller PCB that could be fitted in to a wheel plate also. However, we cannot offer support for this issue and the purchaser should be aware of this BEFORE purchasing.
SR Hardware’s Universal Logitech wheel adapters fit both G25 and G27 wheels, allowing for a change of FFB Wheel base in the future. Beautifully made from a high-quality acrylic, they open up the possibility to mount a large range of wheels and even quick release hubs!
These adapters are drilled to accept both 70mm and 74mm wheels/hubs (the sizes for the majority of modern aftermarket wheels such as Momo etc). They come complete with 6 countersunk stainless steel bolts to mount your wheel.