Loading the content... Loading depends on your connection speed!

brian.clancy@simracinghardware.com
Shopping Cart - £0.00

Showing 1–20 of 26 results

grid
list
Fanatec CSW Pro-Race SLI

Our Fanatec CSW Dash Pro-Race SLI Mounting plates offer a very attractive and high-quality mounting solution for adding a Symprojects Pro-Race shift light array with two rotary encoders your CSW base. These units come complete with rotary encoders pre-fitted and include the Pro-Race SLI pre-installed and wired.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and high-quality SLI Mounting. All the hard work is done is for you, we supply and fit the rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just bolt the plate to your CSW base! A similar unit for our CSW dashboards  is available HERE

£144.95
SBB1 Button Box PlayStation 4 Edition

The SBB1 was designed to be compact, to allow easy fitting in confined spaces. Featuring 8 buttons (six single buttons, plus the two rotaries are also push-buttons!) and two rotary encoders, the SBB1 is built with our usual high-quality components and constructed in our multilayer method to ensure a beautiful and long lasting finish.

 

The unit is Fully USB Plug n Play, just plug it in and go, no software needed, we configure the unit for you and supply everything needed, complete with mounting hardware.

IMPORTANT! : This Button Box will ONLY work with pCars (Project Cars) and any other game that allows the use of a HID USB wired keyboard (normal PC USB keyboard) as a second controller.

 

 

£90.00
SBB2 Button Box Xbox One Edition

Featuring 14 buttons (12 single buttons plus the two rotaries are also push-buttons!) and two rotary encoders, the SBB2 is built with our usual high-quality components and constructed in our multi-layer method to ensure a beautiful and long lasting finish.

 

The unit is Fully USB Plug n Play, just plug it in and go, no software needed, we configure the unit for you and supply everything needed, complete with mounting hardware.

IMPORTANT! : This Button Box will ONLY work with pCars2 (Project Cars 2) and any other game that allows the use of a HID USB wired keyboard (normal PC USB keyboard) as a second controller.

 

 

 

£120.00
SBB2 Button Box PlayStation 4 Edition

Featuring 14 buttons (12 single buttons plus the two rotaries are also push-buttons!) and two rotary encoders, the SBB2 is built with our usual high-quality components and constructed in our multi-layer method to ensure a beautiful and long lasting finish.

 

The unit is Fully USB Plug n Play, just plug it in and go, no software needed, we configure the unit for you and supply everything needed, complete with mounting hardware.

IMPORTANT! : This Button Box will ONLY work with pCars (Project Cars) and any other game that allows the use of a HID USB wired keyboard (normal PC USB keyboard) as a second controller.

 

 

 

£120.00
SBB1 Button Box Xbox One Edition

The SBB1 was designed to be compact, to allow easy fitting in confined spaces. Featuring 8 buttons (six single buttons, plus the two rotaries are also push-buttons!) and two rotary encoders, the SBB1 is built with our usual high-quality components and constructed in our multilayer method to ensure a beautiful and long lasting finish.

 

The unit is Fully USB Plug n Play, just plug it in and go, no software needed, we configure the unit for you and supply everything needed, complete with mounting hardware.

IMPORTANT! : This Button Box will ONLY work with pCars2 (Project Cars 2) and any other game that allows the use of a HID USB wired keyboard (normal PC USB keyboard) as a second controller.

 

 

£90.00
Thrustmaster GTE Pro-Race Wheel Plate

SR Hardware’s Thrustmaster GTE Wheel plate offers a very attractive and high-quality mounting solution for adding a Pro-Race SLI to a standard GTE wheel. These units come complete with a pre-fitted Pro-Race unit.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the SLI, leaving you to just fit the wheel plate to your GTE rim.

 

Please Note:

You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.

 

 

£119.95
Fanatec CSW Pro-Race SLI Mounting

Our Fanatec CSW Pro-Race SLI Mounting plates offer a very attractive and high-quality mounting solution for adding a Symprojects Pro-Race shift light array with two rotary encoders to a Fanatec CSW Base. These units come complete with rotary encoders pre-fitted and include the Pro-Race SLI pre-installed and wired.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and high-quality SLI Mounting. All the hard work is done is for you, we supply and fit the rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just bolt the plate to your CSW Base (Stainless Steel Bolts included)

 

 

£144.95
Fanatec CSW Dash Pro-Race SLI Mounting

Our Fanatec CSW Dash Pro-Race SLI Mounting plates offer a very attractive and high quality mounting soloution for adding a Symprojects Pro-Race shift light array with two rotary encoders to our CSW Dash. These units come complete with rotary encoders pre fitted and include the Pro-Race SLI pre installed and wired.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi layer construction, it offers a stylish and high quality SLI Mounting. All the hard work is done is for you, we supply and fit the rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just bolt the plate to your CSW Dash! A similar unit for standard CSW without our dashboard is available HERE

£139.95
T500 Static Sliding Pro-Race System (Kit)

SR Hardware’s Static Sliding SLI Mounting System has been designed to make mounting a Pro-Race Display to the T500 an easy and painless job without any of the USB cable issues normally found in wheel mounted systems. The mounting adjusts easily and quickly to fit either the GT and GTE wheel’s or the F1 wheel by use of its sliding top section. Simply slacken the two hex bolts slightly and raise or lower, then gently re-tighten… Simple

 

These units come complete with buttons pre-fitted and include all the components needed to mount your Pro-Race Display. Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere.

 

 Does NOT Include Pro-Race and will require wiring / soldering to complete

 

 

 

£69.95
Fanatec CSR / CSR-Elite SLI-Pro Wheel Plate (Kit)

SR Hardware’s Fanatec SLI-Pro Mounting System is a unique concept that finally allows Fanatec wheel owners to enjoy the benefits of an ‘on wheel’ shift light system yet still retain the original wheel and fit without drilling or modifying the standard wheel. Built using our multi-layer construction technology from the finest materials and high-quality components, this mounting system breaks new ground in add-on hardware for Fanatec wheels!

 

Fitting the unit to the Fanatec wheel is very straight forward. We utilise a high tech ‘Adhesive gel gasket’ on the bottom of the unit, whilst a see-through acrylic plate mounts the top of the unit using the original screw hole for the wheel band behind the top of the wheel rim, making for a very secure fitment.

 

Does NOT Include SLI-Pro and will require wiring / soldering to complete

 

£69.95
Fanatec GT2 / GT3 SLI-Pro Wheel Plate (Kit)

SR Hardware’s Fanatec SLI-Pro Mounting System is a unique concept that finally allows Fanatec wheel owners to enjoy the benefits of an ‘on wheel’ shift light system yet still retain the original wheel and fit without drilling or modifying the standard wheel. Built using our multi-layer construction technology from the finest materials and high quality components, this mounting system breaks new ground in add-on hardware for Fanatec wheels!

 

Fitting the unit to the Fanatec wheel is very straight forward. We utilise a high tech ‘Adhesive gel gasket’ on the bottom of the unit, whilst a see-through acrylic plate mounts the top of the unit using the original screw hole for the wheel band behind the top of the wheel rim, making for a very secure fitment.

 

Does NOT Include SLI-Pro and will require wiring / soldering to complete

 

 

£69.95
Logitech G27 Pro-Race Wheel Plate (Kit)

SR Hardware’s Logitech G27 Pro-Race Wheel plates offer a very attractive and high quality complete mounting solution for adding a Symprojects Pro-Race shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. The ‘Kit’ version comes unwired and without a Pro-Race display.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of the shaft and fitted modified soft touch knobs). Just supply and fit your Pro-Race and wire the plate and its ready to fit!

 

Does NOT Include Pro-Race and will require wiring / soldering to complete

 

 

 

£69.95
Logitech G25 Pro-Race Wheel Plate (Kit)

SR Hardware’s Logitech G25 Pro-Race Wheel plates offer a very attractive and high quality complete mounting solution for adding a Symprojects Pro-Race shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. The ‘Kit’ version comes unwired and without a Pro-Race display.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of the shaft and fitted modified soft touch knobs). Just supply and fit your Pro-Race and wire the plate and it’s ready to fit!

 

Does NOT Include Pro-Race and will require wiring / soldering to complete

 

 

 

£69.95
Logitech G27 SLI-Pro Wheel Plate (Kit)

SR Hardware’s Logitech G27 SLI-Pro Wheel plates offer a very attractive and high quality complete mounting solution for adding a Leo Bodnar SLI-Pro shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. The ‘Kit’ version comes unwired and without an SLI display.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of the shaft and fitted modified soft touch knobs). Just supply and fit your SLI and wire the plate and it’s ready to fit!

 

Does NOT Include SLI and will require wiring / soldering to complete

 

 

 

£69.95
Logitech G25 SLI-Pro Wheel Plate (kit)

SR Hardware’s Logitech G25 SLI-Pro Wheel plates offer a very attractive and high quality complete mounting solution for adding a Leo Bodnar SLI-Pro shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. The ‘Kit’ version comes unwired and without an SLI display.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs). Just supply and fit your SLI and wire the plate and its ready to fit!

 

Does NOT Include SLI and will require wiring / soldering to complete

 

 

£69.95
Fanatec CSR / CSR-Elite SLI-Pro Wheel Plate

SR Hardware’s Fanatec SLI Mounting System is a unique concept that finally allows Fanatec CSR and CSR-Elite wheel owners to enjoy the benefits of an ‘on wheel’ shift light system yet still retain the original wheel and fit without drilling or modifying the standard wheel.

Built using our multi-layer construction technology from the finest materials and high-quality components, this mounting system breaks new ground in add on hardware for Fanatec wheels! Completely pre-built and assembled, the mount comes complete with two modified Rotary encoders an SLI-Pro installed and wired!

 

Fitting the unit to the Fanatec wheel is very straight forward. We utilise a high tech ‘Adhesive gel gasket’ on the bottom of the unit, whilst a see through acrylic plate mounts the top of the unit using the original screw hole for the wheel band behind the top of the wheel rim, making for a very secure fitment.

 

Please Note:

You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.

 

 

 

£214.95
Fanatec GT2 / GT3 SLI-Pro Wheel Plate

SR Hardware’s Fanatec SLI Mounting System is a unique concept that finally allows Fanatec wheel owners to enjoy the benefits of an ‘on wheel’ shift light system yet still retain the original wheel and fit without drilling or modifying the standard wheel.

 

Built using our multi-layer construction technology from the finest materials and high-quality components, this mounting system breaks new ground in add-on hardware for Fanatec wheels! Completely pre-built and assembled, the mount comes complete with two modified Rotary encoders and SLI-Pro installed and wired!

 

Fitting the unit to the Fanatec wheel is very straight forward. We utilise a high tech ‘Adhesive gel gasket’ on the bottom of the unit, whilst a see-through acrylic plate mounts the top of the unit using the original screw hole for the wheel band behind the top of the wheel rim, making for a very secure fitment.

 

Please Note:

You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.

 

£214.95
Logitech G27 Pro-Race Wheel Plate

SR Hardware’s Logitech G27 Pro-Race Wheel plates offer a very attractive and high quality complete mounting solution for adding a Symprojects Pro-Race shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. These units come complete with buttons and rotary encoders pre-fitted and include the Pro-Race SLI pre-fitted and wired.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just fit the wheel plate to your G27

 

Please Note:

You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.

 

 

 

£199.95
Logitech G25 Pro-Race Wheel Plate

SR Hardware’s Logitech G25 Pro-Race Wheel plates offer a very attractive and high quality complete mounting solution for adding a Symprojects Pro-Race shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. These units come complete with buttons and rotary encoders pre-fitted and include the Pro-Race SLI pre-fitted and wired.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just fit the wheel plate to your G25

 

Please Note:

You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.

 

£199.95
Logitech G27 SLI-Pro Wheel Plate

SR Hardware’s Logitech G27 SLI-Pro Wheel plates offer a very attractive and high quality complete mounting solution for adding a Leo Bodnar SLI-Pro shift light array with a good range of extra buttons and rotary encoders to a standard Logitech wheel. These units come complete with buttons and rotary encoders pre-fitted and include the SLI-Pro pre-fitted and wired.

 

Like all SR Hardware products, these plates are built using only the best quality materials including high-tech acrylics, stainless steel hex head bolts and the finest 3M Di-Noc coverings. With its unique multi-layer construction, it offers a stylish and higher quality alternative to basic plates available elsewhere. All the hard work is done is for you, we supply and fit the buttons and rotary encoders (pre-trimmed to the correct length of shaft and fitted modified soft touch knobs), fitting the SLI, leaving you to just fit the wheel plate to your G27

 

Please Note:

You will need to consider and safely connect a USB lead to the SLI so that it does not become caught or ‘snagged’ and damage the SLI or wheel plate. This is the customers responsibility.

 

 

 

£224.95
  • 1
  • 2